Lightweight and Compact!
Safe Design with Intrinsically Explosion-proof Specification. An air-powered diaphragm pump that can transport a wide range of liquids, from highly flammable liquids to liquids containing abrasive elements.Fully self-suction type that can pump out fluid efficiently, with no pump-priming required.
There are no sliding parts in wetted parts, eliminating the risk of liquid leakage due to seal friction. The DP-10 series has a nominal diameter of 3/8" (10 mm) and a maximum flow rate of approximately 20 L/min. The maximum size solid is 1 mm or less.
■ Main Applications
Removal of Fuel (Gasoline and diesel oil)/Application of Adhesives/Mounting on Equipment/Recovery of Floating OilrBody Material | A: Aluminum (ADC12) | S: Stainless Steel (SCS14) | P: GF Polypropylene (PP-GF) | |||
Diaphragm Material | ||||||
C: Neoprene (CR) | DP-10BAC (851743) | DP-10BSC (851746) | DP-10BPC (851745) | |||
N: Buna N (NBR) | DP-10BAN (851742) | DP-10BSN (851747) | DP-10BPN (852280) | |||
T:PTFE (TPEE) | DP-10BAT (851725) | DP-10BST (851741) | DP-10BPT (851744) | |||
H: Hytrel(R) (TPEE) | DP-10BAH (851750) | DP-10BSH (851751) | DP-10BPH (851752) | |||
S: Santoprene(R) (TPO) | DP-10BAS (852674) | DP-10BSS (852675) | DP-10BPS (852676) | |||
H/T: Hytrel(R) (TPEE) | DP-10BAH/T (851872) | DP-10BSH/T (851873) | DP-10BPH/T (851874) | |||
Wetted Parts Material | ||||||
Ball Valve | DP-10B〇H/T: PTFE Others: Same as the diaphragm material | |||||
Valve Seat | A5056 | SUS316 | DP-10BPC: CR DP-10BPN: NBR Others: PP-GF | |||
Valve Stopper | PA *1 | SCS14 | PP-GF | |||
Center Disk | A5056 | SUS316 | PP SUS304(Insert material) | |||
Specifications | ||||||
Nominal Diameter | 3/8"(10 mm)Material Connection | |||||
Material Connection | Suction Port | Rc 3/8 | ||||
Discharge Port | Rc 3/8 | |||||
Air Connection | Supply Port | Rc 1/4 (W/air valve) | ||||
Exhaust Port | Rc 3/8 (W/silencer) | |||||
Air Supply Pressure | 0.2～0.7 Mpa*2 | |||||
Maximum Discharge Pressure | 0.7 MPa | |||||
Water Discharge/Cycle | 50 mL *3 | |||||
Maximum Flow Rate | 20 L/min *4 | 17 L/min *4 | ||||
Maximum Air Consumption | 300 L/min（ANR） | 250 L/min（ANR） | ||||
Maximum Size Solid | 1 mm以下 | |||||
Suction Head Lift | 1m | |||||
Net Weight | 3.5 kg | 5.2 kg | 3.0 kg | |||
- DP-10BA□ uses nylon (PA) as the material for the valve stopper. Note the corrosion resistance. Not suitable for MEK, etc.
- The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.
- The water discharge is provided as a rough approximation only. The discharge will differ depending on factors such as the liquid to be transferred and the piping conditions.
- Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.