This pump unit is suitable for transferring extremely high-viscosity materials. Its high pump ratio allows for high discharge pressure even at a low air supply pressure. To prevent adhesion of anaerobic materials such as sealants and putty materials, a cup is attached to the gland section to hold the solution.
[Usable Containers]
JIS Z 1620 Steel Pail Equivalent, or Resin Container Equivalent to This
[Compatible Materials *]Grease NLGI #0~3, Adhesives
*A note concerning materials. This applies to all high-viscosity products.- Cannot be used with materials that contain food or slurry.
- The applicable range of NLGI No. (grease consistency) is provided as a rough approximation only.
- It may be impossible to use the product with some greases depending on their properties, even if they are within the scope of application for the product.
Product No. | 881160 | |
| Model | SR180P65PWAL-T | |
| Pump No. | 854863 | |
| Maximum Discharge Pressure (MPa) | 45.5 | |
| Material Connection Discharge Port | Rc3/4 | |
| Air Connection Supply Port | G3/8(F) | |
| Operating Air Pressure Range (MPa) | 0.2～0.7 | |
| Temp Range (°C) | Ambient | 0～60 |
| Material Temperature | 0～80 | |
| Water Discharge (mL)/Cycle | 76 | |
| Net Weight (kg) | 65 | |